ZEROPLAY Miter Bar (Single)

ZEROPLAY Miter Bar (Single)

Precision miter bars for table saws, router tables, and band saws.

New and improved Build table saw sleds fast

Create precise sleds for your table saw, router table, and band saw quickly and easily with the ZEROPLAY Miter Bar. You adjust the fit of the ZEROPLAY from above after it is mounted to the sled base, so you can control the exact fit you want, gliding feather-light along your table with zero side-to-side movement. Truly zero play with the ZEROPLAY Miter Bars. Fits any standard 3/4” miter slot.

The defining feature and flaw of aftermarket miter bars are one in the same - set screws. Frustrated with the difficulty of fitting miter bars with set screws, Founder and inventor Henry Wang set out to change it. He conceived a method of adjustment based on opposing wedges that adjusted the entire bar evenly in a single motion. With its ONE-TOUCH CALIBRATION® and top-down installation, the age-old struggles of sled making had finally been solved.

Calibrate your miter bar quickly and accurately from above the sled

ZeroPlay Miter Bars are adjusted to fit the miter slot while it is attached to your sled, allowing you to get the best fit possible. Set, test, adjust if needed, then begin using your sled. The two halves of the ZeroPlay expand to fit the slot, providing full contact all along both edges of the bar.

• Fits any standard 3/4" x 3/8” miter slots.
• Mounts and adjusts from above the sled base for fast and accurate set up every time.
• Glass reinforced parts will not warp or swell with environmental changes like wood runners.

Will it fit my miter slot?

ZeroPlay Miter Bars will fit any standard (3/4” x 3/8”) miter slot that measures between 0.73" and 0.79" wide and is at least 5/16" deep.

ZeroPlay Miter Bars will fit any standard (3/4" x 3/8") miter slot that measures between 0.73" and 0.79" wide and is at least 5/16" deep.

Compatible miter tracks include but not exclusive to ShopSmith, SawStop, Bosch 4100, Delta Unisaw, Powermatic, Rigid, Dewalt, and General 350 Tracks.

*Not compatible with table saws with tabs cast into the top of the miter slot or 5/8" miter slots i.e. Ryobi or Craftsman.

Top-down installation for hassle-free setup.

Mount and adjust from above for the best-fit fast.

ZEROPLAY is adjusted to the miter slot while in the miter slot and attached to your sled for the best possible fit with the least possible effort.

Speed and versatility

Miter Bars can be used in tandem for longer sleds or to engage both miter slots simultaneously. Retrofit to your existing sled and move easily from jig to jig.

Included in the box:
Miter Bar