Pocket Hole Screw 2-1/2" Coarse 250

About:

• Kreg part # SML-C25O-250
• 2-1/2"
• #8 Coarse
• Washer-Head
• 250 count
• The ideal screw for joining 2 x 4 s

Why Kreg Pocket Hole Screws are better:

• Extra metal in head eliminates head snapping off
• Deep square drive prevents driver from jumping out
• Large Maxi-Loc Head STOPS when it hits bottom of the hole
• Case hardened STEEL screw
• Sharp edge of Self-Tapping tip drills a cleaner pilot hole
• Needle sharp point minimizes walking

About the Maxi-Loc™ Head:

Kreg's most common screw head type is the Maxi-Loc™ (SML) which is a washer head screw. The large bearing surface of the washer head is designed to seat securely in the bottom of the pocket, providing a tremendous amount of consistent clamping force on the joint line. Our second head style is referred to as a pan head (SPS). The pan head is a slightly smaller head size that allows it to easily get below flush when joining 1/2 material. This is particularly helpful when joining 1/2 to 1/2 plywood for drawer boxes.

Coarse thread is good for softer woods:

• Pine,Cedar,Fir,Spruce,Basswood,Butternut,Poplar,Aspen,Plywood,Melamine,MDF,and Particle Board