Foredom

The flexible inner shaft should be checked, wiped clean, and relubricated with grease every 50 hours of use. With every 200 hours of use, the shaft should be thoroughly cleaned with solvent and...

Foredom 5240 Woodcarving Kit PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product...

The popular foot operated variable speed control in sturdy plastic housing. For use with 115 Volt M.SR, M.SRB, M.SRH and M.SRBH motors. The reliable C.FCT-1 is Foredom's most popular foot operated...

Foredom chisels are for use in our H.50 and H.50C handpieces. They also fit other power chisel tools including those from Proxxon and WeCheer. Cutters have 18mm long tangs and 55mm and 75mm overall...

These are NOT collets. You can use them with Foredom Flex Shaft Handpieces or Micromotor Handpieces — as long as the handpiece has a collet. They are 'step down' adapters that fit inside a...

These are NOT collets. You can use them with Foredom Flex Shaft Handpieces or Micromotor Handpieces — as long as the handpiece has a collet. They are 'step down' adapters that fit inside a...

These are NOT collets. You can use them with Foredom Flex Shaft Handpieces or Micromotor Handpieces — as long as the handpiece has a collet. They are 'step down' adapters that fit inside a...

Use with Series SR and other 'universal' motors. Includes dial speed control, chisel handpiece, and 11 chisels. 115 Volt K.EM-50 Kit includes C.EM-1 Dial Speed Control, H.50 Chisel Handpiece and the...

Double Motor hanger with screw in base mount and spring safety clips holds up to 2 motors. Central component of Work Bench System. The new MAMH-13 features a 25-3/4" long x .844" (21.43mm) diameter...

Helps organize bits and will keep them from damage Rotating holder will hold 92, 1/8" bits and 13 1/4" bits 7 spaces for drill bits ranging from 1/16" to 5/32" A 3" x 2-3/4" center cup also...

This is a collet type handpiece that accepts accessories with up to 1/4" diameter shanks. Has pre-lubricated ball bearings that require no additional lubrication. Comes with 3/32", 1/8" and 1/4"...

Screw type mandrel with 1/8" shank for mounting wheels, stones, felt bobs, small buffs, and other unmounted accessories with 1/8" arbor holes. Screw type mandrels come with different shank sizes...