Clear Plastic 10" Stepped Center Finder
- SKU:
- RB00002
- Shipping:
- Calculated at Checkout
Description
- Lay out bowls, trays and platters in no time! The Clear Acrylic 10" Layout & Centering Finding Compass is great for laying out bowl, trays, platters and more. It can also be used for laying out standard circles up to 10" for many different types of projects. All you need to do is tap a small nail through the center hole, insert a pencil in your choice of diameter hole ( Marks circles from 1", to 10", in 1/2", increments), then pivot around the center point to make your circle mark.
- Also use for standard circles up to 10"
- Tap a small nail through center hole
- Insert pencil in your choice of diameter hole
- Makes circles from 1" to 10" in 1/2" increments
Related Products
Sku: BH19068
Center Finder Jig
$6.95
Easily locate the center on any round, square, hexagonal or octagonal stock up to 8" in diameter.
Sku: CF97161
Center Finder Tape Measure 16'
$16.95
The Centerpoint tape measure makes it very easy to find the centerpoint of your work, both in the shop and on the job. Whether it's a desk top or a framed wall, finding the center has never been...
Sku: IP34222
12" Center Finder & Bevel Ruler
$18.95
Ruler side has a center rule on top in 32nds and left to right on bottom in 16ths
Bevel gauge side has an angle scale from 0° to 50° with 1/2° marks and 1/4° dots for easy reading and 3" rule on the...
Sku: TY00103
Tim's Tools Speed 3 Steel Center Finder
$14.95
Tim's Tools Speed 3 Steel Center Finder
Never fumble with a standard ruler again while marking the center of a blank. These cork-backed center finders resist slipping and are easy to hold. They are...
Sku: TY00106
Tim's Tools Speed 6 Steel Center Finder
$24.95
Tim's Tools Speed 6 Steel Center Finder
Never fumble with a standard ruler again while marking the center of a blank. These cork-backed center finders resist slipping and are easy to hold. They are...
Sku: WG48012
Clear Plastic Tubes for Pens and Scroll Saw Blades
$0.99
These 3/4" square x 6" tubes are a wonderful way to display and store your finished pens! They are permanently sealed on one end and have a removable cap on the other - The square shape allows for...
Sku: WK42060
4" x 10' Hose (Clear)
$32.95
Spiral reinforced Clear Hose allows easy inspection for locating potential clogs in your duct work.
Sku: WK42040
3" x 10' Clear Hose
$22.95
3" x 10' Clear Hose
Spiral reinforced Clear Hose allows easy inspection for locating potential clogs in your ductwork. Uses LH fittings. 3" ID. Made in the USA.
Size: 3" x 10'
Sku: TY00200
Tim's Tools Steel Angle Finder
$24.95
Woodturner's Angle Gauge
After turning for over twenty years Tim Yoder kept suffering from ‘bevel creep’. Over time his bevel angle on a tool would creep away from his preferred grind. After...