Proxxon Hot Wire Foam Thermocut 12/E

For free modeling in Styrofoam. For free cutting in thick Styrofoam panels for Diorama model railway construction. For the manufacture of any profile.

For architectural model building, prototype construction, for designers and decorators. For fine work on construction insulation. And of course for classical model building. No "crumbling" as when working with knife and sandpaper!

Stable frame with pivoted fixing element and extendable lower wire fixing. This means a maximum extension of 200mm. Work piece height 150mm. Cutting wire temperature infinitely variable: with a little practice, you can achieve optimum cuts depending on the material density and thickness. This is mostly possible at medium temperatures and without too much pressure. Heat-up time 1 second! Complete with five deformable cutting wires 200 x 0.85mm.

Technical data:

12V. 60W. 50/60Hz. Cutting wire temperature is variable between 150 and 350 C°. We recommend MICROMOT mains adaptors with a capacity of 2.0A for operation.

Proxxon number 27 082.

• Cutting wires (200 x 0.85mm) can be deformed for the manufacture of any profile by hand or tongs
• Extendable wire fixing for maximum extension of 200mm
• Pivoted fixing element at top
• Cutting temperature infinitely variable
• Polarity-protected system plug for MICROMOT mains adaptors

Note:
Styrofoam is an inexpensive material, and extremely environmentally friendly compared with all other materials. Can be purchased in specialist shops and DIY centers.

Please note: adapters are sold separately. (Proxxon Micromot AC Adapter 5/E PX38704 & Proxxon Micromot AC Adapter 2/S PX38706)