Window Sill Edge 1-3/8CDX7/8 TO 1-5/8

These bits will be your "go to" bits after you try them one time. The quality if the carbide is tops in the industry and overall construction of the bits can't be beat.

• Made from solid alloy steel
• Precision ground for proper balance at high RPM's
• Highest quality micrograin carbide
• Made with thick carbide for extra sharpenings

This is the only bit you will need to make a complete window sash. The bearing guide controls the pattern depth and also allows you to make arched or curved windows and glass doors.

This assembly with the straight end cutter cuts the inside edges on both the stiles and rails. Convert the assembly to make the mating end cut by exchanging the straight cutter for the spacer (The spacer can be installed between the profile cutter and the shank if additional reach across the workpiece is needed). Now make the mating end cuts on the rails. This bit can also be used to cut both the decorative edges and the mating end cuts required to make your own window mullions (crosspieces).

Specifications:

• Cutting diameter: 1-3/8"
• Cutting length: 7/8 - 1-5/8"
• Overall length: 3-5/8"