Turnmaster HSS TiN Cutter Detail

This cutter is perfect for roughing down square stock to round and is therefore ideal for spindle work. As its name suggests its fine point also allows for fine detail on bowls and spindles. Shear scraping with this cutter is NOT recommended. Made with M2 HSS and coated with hard wearing titanium nitride, these popular cutters offer excellent sharpness and durability while delivering Robert Sorby HSS reliability.

Sharpening:
Use a diamond file or honing stone around the profile of the cutter. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a zirconium or ceramic belt or on a grinding wheel using a standard abrasive material. Sharpens to: 0.15 -0.2 microns Hardness of coating up to 85RC Material: TIN coating on M2 HSS.

Excelsior TurnMaster Detail Point Cutter - Titanium Nitride Coated (TIN)

• Cutter Description: HSS Excelsior Detail Point
• Material Use Sharpening: Titanium Nitride Coated HSS
• Use: Line detailing and finishing
• Note: Sharpening required