Beall

Finally - a device that allows you to run three buffs simultaneously. On one end of this 17" mandrel is a machined #2 Morse taper to fit in the head stock of your lathe; on the other a center to...

The Wood Buff Kit includes: 4" Tripoli Wheel 4" White Diamond Wheel 4" Wax Wheel Tripoli Bar White Diamond Bar Wax Bar Adaptor The Wood Buff is designed to be used with a 1/3 hp or more, 1725 motor...

Consists of one 8" buffing wheel with center bolt for quick change, a combination 1/2" - 5/8" adaptor.

Consists of one 8" buffing wheel with center bolt for quick change, a combination 1/2" - 5/8" adaptor.

Consists of one 8" buffing wheel with center bolt for quick change, a combination 1/2" - 5/8" adaptor.

The Wood Buff Kit includes: 8" Tripoli Wheel 8" White Diamond Wheel 8" Wax Wheel Tripoli Bar White Diamond Bar Wax Bar Adaptor The Wood Buff is designed to be used with a 1/3 hp or more, 1725 motor...

The purpose of Bowl Buffs and other similarly shaped products is the same - to buff concave surfaces thoroughly and safely. Unlike many other brands which are available only in firm and designed for...

Especially designed to conform to the concave surfaces of bowls or goblets. They are available in three different fabrics - one for each of the compounds and wax used in the Beall Buffing System:...

Before beginning the buffing process, sand the wood surface to 220 - 320 grit. Soft woods may benefit from an application of a sealer coat of oil. Allow the sealer to fully cure before beginning the...

Before beginning the buffing process, sand the wood surface to 220 - 320 grit. Soft woods may benefit from an application of a sealer coat of oil. Allow the sealer to fully cure before beginning the...

Before beginning the buffing process, sand the wood surface to 220 - 320 grit. Soft woods may benefit from an application of a sealer coat of oil. Allow the sealer to fully cure before beginning the...

The Beall Wood Threader Kit is a jig that works in conjunction with your small router or laminate trimmer to cut threaded dowels and has taps that are used to thread what will become wooden nuts or...