Supermax 25X2 5HP/1PH

Shown with optional accessories(Casters, In/Out Tables and Abrasive Rack - not included)

Does not ship with cord or plug.

Sand two grits in a single pass with a 25??2 Double Drum Sander. Featuring INTELLISAND TECHNOLOGYl and a 5 HP motor, you can significantly reduce the amount of time you spend sanding.

The 25??2 Double Drum Sander features INTELLISAND TECHNOLOGY that auto-regulates the conveyor based on load, preventing burning, gouging, and damaging stock. The machine comes standard on an open-column base, and features a 5 HP motor. Available in Single and 3 Phase power.

Exceptional SuperMax Features:

• INTELLISAND TECHNOLOGY: Automatically adjusts conveyor speed based on load
  • Prevents gouging, damaging or burning stock
  • Provides consistent finish even with varying grain pattern and density
  • Greatly increases abrasive planing and dimensioning speed
• Flatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no "flex" in conveyor, guaranteeing flatness to less than .010" across the width of the sander
• Abrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinner
• Patented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlap
• Easiest access to abrasive fastening system of any drum sander! Machine design includes additional space around abrasive, eliminating the need for special tools
• Self-cooling drum prevents overheating and extends abrasive life

Additional Features:

• Drum ball bearing are sealed and permanently lubricated
• Cast stand, zinc-plate steel bed, centerless ground column tubes

Specifications:

• Sanding Capacity:
  • Maximum Width: 25"
  • Minimum Length: 3-1/2"
  • Maximum Thickness: 6"
  • Minimum Thickness: 1/32"
• Dimensions HxWxD: 43" x 46" x 31"
• Drum: Extruded aluminum, 5" x 25"
• Drum speed: 1740 RPM
• Dust hood: Steel hood, hinged at back
• 25" model: one (1) 4" vacuum port, min. 1000 CFM recommended
• Ball bearings (1"): 4, sealed and permanently lubricated
• Conveyor motor: 100 in.-lb. torque, direct drive D.C. motor, infinitely variable 0-15 FPM
• Drive motor (TEFC): 5 HP, 208-230V, 60HZ
• Power requirements: 1 PH, 30 amp service; 3 PH 20 amp service
• Shipping weight (lbs): 475